Share:
Specifications
SKU: 976484
General Purpose N-Channel FETN
| Parameter | Description | Value/Range |
|---|---|---|
| Part Number | Unique identifier for the component | SLA5001 |
| Type | Type of component | MOSFET Driver |
| Supply Voltage (Vcc) | Operating voltage range for the supply | 4.5V to 20V |
| Input Voltage (Vin) | Range of input voltages | 0V to Vcc |
| Output Current | Maximum output current | 1.5A (continuous) |
| Operating Temperature | Temperature range for operation | -40°C to +125°C |
| Storage Temperature | Temperature range for storage | -65°C to +150°C |
| Package | Type of package | SOIC-8 |
| Pin Count | Number of pins | 8 |
| Quiescent Current | Current consumed by the device when not driving any load | 10μA (typical) |
| Propagation Delay | Time delay from input to output | 50ns (typical) |
| Rise Time | Time taken for the output to rise from 10% to 90% of its final value | 30ns (typical) |
| Fall Time | Time taken for the output to fall from 90% to 10% of its final value | 30ns (typical) |
| Protection Features | Built-in protection features | Overvoltage, Overcurrent, Thermal Shutdown |
Instructions for Use:
Power Supply Connection:
- Connect the supply voltage (Vcc) to the appropriate pin.
- Ensure the supply voltage is within the specified range (4.5V to 20V).
Input Signal:
- Apply the input signal (Vin) to the designated pin.
- The input signal should be within the range of 0V to Vcc.
Output Configuration:
- Connect the load to the output pins.
- Ensure the load current does not exceed the maximum output current of 1.5A continuous.
Thermal Management:
- Ensure proper heat dissipation if operating at high temperatures or high currents.
- Consider using a heatsink if necessary.
Protection:
- The device includes overvoltage, overcurrent, and thermal shutdown protections.
- Do not exceed the absolute maximum ratings to avoid damage.
Storage and Handling:
- Store the device in a dry, cool place within the temperature range of -65°C to +150°C.
- Handle with care to avoid static discharge and physical damage.
Testing:
- Before integrating into a circuit, test the device with a simple load to ensure it operates correctly.
- Measure the quiescent current and propagation delay to verify performance.
Inquiry - SLA5001
