Share:
Specifications
SKU: 991953
3-13V Single Hot-Swap IC w/ Power Good Report, Act-High Enable 14-SOIC -40 to 85
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | - | 4.5 | - | 18 | V |
| Input Voltage (Digital) | VI | - | 0 | - | VCC | V |
| Output Voltage (Digital) | VO | IO = 1 mA | 0.2 | - | VCC - 0.2 | V |
| Input Current (Digital) | II | VI = 0 V | -1 | - | 1 | mA |
| Output Current (Digital) | IO | VO = 0 V | -10 | - | 10 | mA |
| Analog Input Voltage | VIN | - | 0 | - | VCC | V |
| Analog Output Voltage | VOUT | IOUT = 1 mA | 0.2 | - | VCC - 0.2 | V |
| Analog Channel Resistance | RON | VCC = 5 V, f = 1 kHz | - | 125 | - | Ω |
| Power Dissipation | PD | TA = 25°C | - | - | 150 | mW |
| Operating Temperature | TOP | - | -40 | - | 85 | °C |
| Storage Temperature | TSTG | - | -65 | - | 150 | °C |
Instructions for Using the MC14051BG
Supply Voltage:
- Ensure the supply voltage (VCC) is within the range of 4.5 V to 18 V.
- Connect the VCC pin to the positive supply and the GND pin to the ground.
Digital Inputs:
- Apply digital input voltages (VI) between 0 V and VCC.
- Ensure the input current (II) does not exceed ±1 mA.
Digital Outputs:
- The output voltage (VO) will be within 0.2 V of the supply voltage when the output current (IO) is 1 mA.
- Ensure the output current (IO) does not exceed ±10 mA.
Analog Inputs:
- Apply analog input voltages (VIN) between 0 V and VCC.
Analog Outputs:
- The analog output voltage (VOUT) will be within 0.2 V of the supply voltage when the output current (IOUT) is 1 mA.
Channel Resistance:
- The on-state resistance (RON) of the analog channels is typically 125 Ω at VCC = 5 V and f = 1 kHz.
Power Dissipation:
- Ensure the power dissipation (PD) does not exceed 150 mW to avoid overheating.
Temperature Range:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device within the temperature range of -65°C to 150°C.
Handling Precautions:
- Handle the device with care to avoid static discharge.
- Use appropriate decoupling capacitors to filter out noise from the power supply lines.
Pin Configuration:
- Refer to the datasheet for the specific pin configuration and function of each pin.
For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.
(For reference only)Inquiry - MC14051BG
