Share:
Specifications
SKU: 1010997
| Parameter | Description | Units |
|---|---|---|
| Model Number | ASCO2300 | - |
| Type | Solenoid Valve | - |
| Voltage Rating | 12V DC, 24V DC, 115V AC, 230V AC | V |
| Power Consumption | 3.5W (12V DC), 4.5W (24V DC), 8W (115V AC), 12W (230V AC) | W |
| Flow Rate | Up to 100 L/min | L/min |
| Pressure Range | 0 to 10 bar (gauge) | bar |
| Temperature Range | -10°C to 60°C | °C |
| Connection Size | 1/4" NPT or G1/4 (depending on model) | - |
| Material | Brass body, stainless steel plunger, EPDM seals | - |
| Coil Insulation | Class F (155°C) | °C |
| Protection Class | IP65 (Dust tight, protected against water jets) | - |
| Weight | 0.5 kg | kg |
Instructions for Use
Installation:
- Ensure the valve is installed in a clean, dry location.
- Connect the valve to the appropriate power supply according to the voltage rating.
- Use the correct connection size (1/4" NPT or G1/4) to connect the valve to the fluid system.
Operation:
- Apply the rated voltage to the coil to energize the valve.
- The valve will open, allowing fluid to flow through.
- When the power is removed, the valve will close, stopping the flow.
Maintenance:
- Regularly inspect the valve for signs of wear or damage.
- Clean the valve periodically to prevent blockages.
- Replace seals if they show signs of degradation.
Safety Precautions:
- Do not exceed the maximum pressure or temperature ratings.
- Ensure the valve is properly grounded to avoid electrical hazards.
- Do not use the valve with fluids that may react with the materials of construction.
Troubleshooting:
- If the valve does not operate, check the power supply and connections.
- If the valve leaks, inspect the seals and connections for damage.
- If the valve fails to close, ensure there is no debris blocking the valve.
Inquiry - ASCO2300
