Share:
Specifications
SKU: 1033631
1.5 A 280kHz/560kHz Boost Regulators; Package: SOIC-8 Narrow Body; No of Pins: 8; Container: Tape and Reel; Qty per Container: 2500
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage (VCC) | Operating voltage range | 2.0 | - | 6.0 | V |
| Input Low Voltage (VIL) | Maximum input low voltage | -0.5 | - | VCC - 1.5 | V |
| Input High Voltage (V<subIH) | Minimum input high voltage | VCC - 1.5 | - | VCC + 0.5 | V |
| Output Low Voltage (VOL) | Maximum output low voltage at IOL = 4 mA | -0.5 | - | 0.4 | V |
| Output High Voltage (VOH) | Minimum output high voltage at IOH = -4 mA | 2.4 | - | VCC + 0.5 | V |
| Input Leakage Current (IIL) | Maximum input leakage current | -1.0 | - | 1.0 | μA |
| Output Leakage Current (IOL) | Maximum output leakage current at VOL = 0.4 V | -1.0 | - | 1.0 | μA |
| Propagation Delay Time (tpd) | Maximum propagation delay time | - | 10 | - | ns |
| Power Dissipation (PD) | Maximum power dissipation | - | - | 100 | mW |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 2.0 V to 6.0 V.
- Connect the ground (GND) pin to a stable reference ground.
Input Signals:
- Apply input signals that comply with the input voltage levels:
- Low input (VIL): -0.5 V to VCC - 1.5 V
- High input (VIH): VCC - 1.5 V to VCC + 0.5 V
- Apply input signals that comply with the input voltage levels:
Output Signals:
- The output will be low (VOL) when the inputs are not equal, with a maximum voltage of 0.4 V at 4 mA.
- The output will be high (VOH) when the inputs are equal, with a minimum voltage of 2.4 V at -4 mA.
Current Handling:
- Ensure that the input and output currents do not exceed the specified limits to avoid damage to the device.
- Input leakage current (IIL) should be within ±1.0 μA.
- Output leakage current (IOL) should be within ±1.0 μA.
Propagation Delay:
- The maximum propagation delay time (tpd) is 10 ns, which should be considered in timing-critical applications.
Power Management:
- The device can dissipate up to 100 mW of power. Ensure adequate heat dissipation if operating near this limit.
Storage and Handling:
- Store the device in a dry, static-free environment.
- Handle with care to avoid damage from electrostatic discharge (ESD).
By following these guidelines, you can ensure reliable operation of the MM74HC688WM in your circuit.
(For reference only)Inquiry - MM74HC688WM
