Share:
Specifications
SKU: 1131358
Sensor and Detector Interface 5.5V 7.5mA SPI Interface Automotive 20-Pin SOIC T/R
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | Operating supply voltage |
| Output Current per Channel | IO | - | 200 | - | mA | Maximum output current per channel |
| Continuous Output Current | ICONT | - | 50 | - | mA | Continuous output current per channel |
| Peak Output Current | IPEAK | - | 200 | - | mA | Peak output current per channel |
| Thermal Shutdown Temperature | TSD | - | 150 | - | °C | Temperature at which thermal shutdown occurs |
| Operating Temperature Range | TOPR | -40 | - | 125 | °C | Operating temperature range |
| Storage Temperature Range | TSTG | -65 | - | 150 | °C | Storage temperature range |
| Input Voltage Range | VIN | 0 | - | 5.5 | V | Valid input voltage range for logic inputs |
| Quiescent Current | IQ | - | 10 | - | μA | Quiescent current when all outputs are off |
| Output Low Voltage | VOL | 0.4 | 0.6 | 0.8 | V | Output low voltage at 50 mA |
| Output High Voltage | VOH | 4.5 | 4.7 | 5 | V | Output high voltage at 50 mA |
| Propagation Delay Time | tPD | - | 35 | - | ns | Propagation delay time from input to output |
| Power Dissipation | PD | - | 1000 | - | mW | Maximum power dissipation per channel |
Instructions:
Supply Voltage (VCC):
- Ensure the supply voltage is within the specified range of 4.5V to 5.5V to avoid damage to the device.
Output Current:
- Do not exceed the maximum output current of 200 mA per channel to prevent overheating and potential failure.
- For continuous operation, keep the output current below 50 mA per channel.
Thermal Management:
- The device will automatically shut down if the temperature exceeds 150°C. Ensure proper heat dissipation and cooling to maintain operational temperatures within the specified range.
Operating Temperature:
- The device can operate between -40°C and 125°C. Avoid operating in extreme temperatures to ensure reliable performance.
Storage Temperature:
- Store the device in an environment with temperatures ranging from -65°C to 150°C to prevent damage.
Input Voltage:
- Apply input voltages within the range of 0V to 5.5V to ensure proper logic levels are recognized by the device.
Quiescent Current:
- When all outputs are off, the quiescent current should be around 10 μA. This is important for low-power applications.
Output Voltage Levels:
- The output low voltage (VOL) should be between 0.4V and 0.8V at 50 mA.
- The output high voltage (VOH) should be between 4.5V and 5V at 50 mA.
Propagation Delay:
- The propagation delay time from input to output is typically 35 ns. This is important for timing considerations in your circuit design.
Power Dissipation:
- The maximum power dissipation per channel is 1000 mW. Ensure that the total power dissipation does not exceed this limit to avoid overheating.
By following these parameters and instructions, you can ensure the reliable and efficient operation of the TPIC8101DWR.
(For reference only)Inquiry - TPIC8101DWR
