Instructions for Use:

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to the appropriate pin.
   • Ensure the supply voltage is within the range of 2.7V to 5.5V.

2. Ground Connection:

   • Connect the ground (GND) pin to the system ground.

3. Output Connection:

   • Connect the load to the output (OUT) pin.
   • The maximum output current should not exceed 200mA.

4. Enable Control:

   • To enable the device, apply a voltage greater than 1.2V to the enable (EN) pin.
   • To disable the device, apply a voltage less than 0.8V to the enable (EN) pin.

5. Capacitor Selection:

   • Use a ceramic capacitor with a value of 1μF to 10μF at the input (IN) and output (OUT) pins for stability.
   • Place the capacitors as close as possible to the respective pins.

6. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • Refer to the thermal resistance data in the datasheet for detailed thermal management.

7. Layout Recommendations:

   • Keep the traces short and wide to minimize parasitic inductance and resistance.
   • Use a ground plane to reduce noise and improve thermal performance.

8. Storage and Handling:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle the device with care to avoid static discharge and physical damage.