Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 1.65V to 1.95V.
   • Connect the V_CC pin to a stable power source.

2. Standby Mode:

   • To enter standby mode, set the Chip Select (CS) pin to a high state.
   • The standby current (I_CCSTBY) should be less than or equal to 0.5 μA.

3. Active Mode:

   • To activate the device, set the CS pin to a low state.
   • The active current (I_CCACT) during continuous read operations should be less than or equal to 10 mA.

4. Timing Parameters:

   • The access time (t_AA) and cycle time (t_CYC) are both 70 ns when V_CC is 1.8V and the load capacitance (CL) is 50 pF.

5. Output Levels:

   • The output high voltage (V_OH) should be between 1.6V and 1.8V when the output current (I_O) is -0.4 mA.
   • The output low voltage (V_OL) should be between 0V and 0.2V when the output current (I_O) is 0.4 mA.

6. Input Levels:

   • The input low voltage (V_IL) should be between 0V and 0.8V.
   • The input high voltage (V_IH) should be between 1.0V and 1.8V.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

8. Mounting:

   • Follow the recommended soldering profile to ensure proper bonding and avoid thermal stress.
   • Ensure that all pins are correctly aligned before soldering.