Instructions for Using NDS7002A

1. Supply Voltage (V_DD):

   • Ensure the supply voltage is within the range of 1.6V to 5.5V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Output Voltage:

   • The output high voltage (V_OH) should be at least V_DD - 0.4V and can go up to V_DD - 0.1V.
   • The output low voltage (V_OL) should be between 0V and 0.4V.

3. Input Voltage:

   • For a valid high input (V_IH), the voltage should be at least 2.0V.
   • For a valid low input (V_IL), the voltage should not exceed 0.8V.

4. Propagation Delay Time (t_pd):

   • The typical propagation delay time is 3.5ns, with a maximum of 7.0ns. This is the time it takes for the output to respond to a change in the input.

5. Power Consumption (I_CC):

   • The typical power consumption is 1μA, but it can go up to 10μA. Ensure your power supply can handle this current.

6. Operating Temperature (T_OPR):

   • The device is designed to operate within a temperature range of -40°C to 125°C. Ensure the operating environment stays within these limits.

7. Storage Temperature (T_STG):

   • When the device is not in use, store it in an environment with temperatures ranging from -65°C to 150°C.

8. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Store the device in a dry, cool place to prevent moisture damage.

9. Soldering:

   • Use a soldering iron with a temperature no higher than 300°C and ensure the soldering process is completed within 10 seconds to avoid thermal damage.

10. Testing:

    • Before integrating the NDS7002A into your circuit, test it using a known good setup to ensure it functions correctly.