Instructions for Use:

1. Mounting:

   • Ensure proper heat dissipation by mounting the diode on a heatsink if necessary.
   • Avoid mechanical stress on the leads during soldering and handling.

2. Soldering:

   • Use a temperature-controlled soldering iron and keep the soldering time as short as possible (typically less than 3 seconds).
   • Soldering temperature should not exceed 260°C.

3. Electrical Connections:

   • Connect the cathode (K) to the positive side of the circuit and the anode (A) to the negative side.
   • Ensure that the reverse voltage does not exceed the specified breakdown voltage (VBR).

4. Handling:

   • Handle with care to avoid damaging the diode.
   • Use anti-static precautions to prevent electrostatic discharge (ESD) damage.

5. Storage:

   • Store in a dry, cool place within the specified storage temperature range.
   • Keep away from direct sunlight and sources of high humidity.

6. Testing:

   • Use a multimeter or a diode tester to verify the functionality of the diode.
   • Check for continuity between the anode and cathode; there should be a low resistance in one direction and high resistance in the other.

7. Safety:

   • Always follow safety guidelines and wear appropriate personal protective equipment (PPE) when working with electrical components.
   • Do not exceed the maximum ratings specified in the datasheet to avoid damage to the diode.