Share:
Specifications
SKU: 1240790
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | C3202 |
| Type | Capacitor | |
| Capacitance | Amount of charge stored at a given voltage | 100 μF |
| Voltage Rating | Maximum DC voltage that can be applied continuously | 50 V |
| Tolerance | Variability in capacitance value | ±10% |
| Operating Temperature | Range of temperatures for reliable operation | -55°C to +85°C |
| Size | Dimensions of the component | 12.5 x 20 mm |
| Case Style | Physical form factor | Radial |
| Termination | Method of connecting to circuit board | Through-hole |
| Material | Dielectric material used | Aluminum Oxide |
| Mounting Style | Method of mounting on the PCB | Vertical |
| Compliance | Standards or regulations met | RoHS, REACH |
Instructions:
Handling:
- Handle with care to avoid physical damage.
- Do not apply excessive force when inserting into the PCB.
Mounting:
- Ensure the capacitor is mounted vertically to maintain stability.
- Insert the leads through the designated holes on the PCB and solder them securely.
Polarity:
- This capacitor is polarized. Ensure the positive lead is connected to the positive terminal and the negative lead to the ground or negative terminal.
Voltage:
- Do not exceed the maximum voltage rating of 50V DC to prevent damage or failure.
Temperature:
- Operate within the temperature range of -55°C to +85°C to ensure reliable performance.
Storage:
- Store in a dry, cool place to prevent degradation of performance.
Soldering:
- Use a soldering iron with a temperature not exceeding 350°C to avoid damaging the component.
- Solder each lead for approximately 2-3 seconds.
Inspection:
- After soldering, inspect the connections for proper alignment and secure solder joints.
Testing:
- Test the assembled circuit to ensure the capacitor is functioning correctly.
Inquiry - C3202
