Share:


QM5HG-24

Specifications

SKU: 1245419

BUY QM5HG-24 https://www.utsource.net/itm/p/1245419.html
MEDIUM POWER SWITCHING USE NON-INSULATED TYPE
Parameter Description Value
Part Number Identifies the specific product QM5HG-24
Type Type of relay High-Voltage
Contact Form Configuration of relay contacts SPDT
Coil Voltage Voltage required to energize the coil 24VDC
Coil Power Power consumption of the coil 1.2W
Coil Resistance Resistance of the coil at 20°C 500Ω
Switching Voltage Maximum voltage the contacts can switch 380VAC
Switching Current Maximum current the contacts can switch 10A
Contact Resistance Resistance between contacts when closed ≤ 50mΩ
Insulation Resistance Resistance between contacts and coil ≥ 100MΩ
Dielectric Strength Voltage the insulation can withstand without breakdown 2500VAC
Operating Temperature Range of temperatures for reliable operation -40°C to 85°C
Storage Temperature Range of temperatures for storage -40°C to 85°C
Mechanical Life Number of operations before failure (no load) 10 million cycles
Electrical Life Number of operations before failure (at rated load) 100,000 cycles
Weight Weight of the relay 30g
Dimensions Physical size of the relay 22.5mm x 13.5mm x 12.5mm

Instructions for Use

  1. Installation:

    • Ensure the relay is installed in a location that meets the operating temperature requirements.
    • Mount the relay securely to prevent mechanical stress on the terminals.
  2. Wiring:

    • Connect the coil terminals to the control circuit using the specified coil voltage.
    • Connect the load to the contact terminals, ensuring the load does not exceed the maximum switching voltage and current ratings.
  3. Operation:

    • Apply the coil voltage to energize the relay, which will cause the contacts to change state.
    • When the coil voltage is removed, the contacts will return to their default state.
  4. Maintenance:

    • Regularly inspect the relay for signs of wear or damage.
    • Clean the relay and its surroundings to prevent dust and debris from affecting performance.
  5. Safety:

    • Always disconnect power before performing any maintenance or wiring changes.
    • Do not exceed the rated voltage and current specifications to avoid damage or safety hazards.
  6. Disposal:

    • Dispose of the relay according to local regulations for electronic components.
(For reference only)

 Inquiry - QM5HG-24