Instructions:

1. Handling:

   • Handle with care to avoid damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions.

2. Soldering:

   • Preheat the PCB to 100-120°C.
   • Solder at a temperature of 260°C for no more than 10 seconds.
   • Allow the component to cool naturally after soldering.

3. Storage:

   • Store in a dry, cool place.
   • Avoid exposure to high humidity and extreme temperatures.

4. Inspection:

   • Visually inspect the component for any physical damage before installation.
   • Verify the resistance value using a multimeter if necessary.

5. Mounting:

   • Place the resistor on the PCB according to the silkscreen markings.
   • Ensure the component is aligned correctly before soldering.

6. Testing:

   • After assembly, test the circuit to ensure the resistor is functioning correctly.
   • Check for proper resistance and power dissipation.