Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.0V to 5.5V.
   • Exceeding this range can damage the device.

2. Output Current (Iout):

   • The device can provide up to 100mA of output current.
   • Do not exceed this limit to avoid overheating or damage.

3. Quiescent Current (IQ):

   • The quiescent current is very low at 1.0μA, making it suitable for low-power applications.

4. Dropout Voltage (Vdo):

   • The dropout voltage is 0.3V, which means the input voltage should be at least 0.3V higher than the output voltage for proper regulation.

5. Operating Temperature:

   • The device operates reliably between -40°C and 125°C.
   • Avoid operating outside this range to prevent performance degradation or failure.

6. Storage Temperature (Tstg):

   • Store the device between -65°C and 150°C to ensure long-term reliability.

7. Load Regulation:

   • The load regulation is 2.0mV per 100mA change in load current, indicating good stability under varying loads.

8. Line Regulation:

   • The line regulation is 0.01% per volt change in input voltage, ensuring stable output even with fluctuations in input voltage.

9. Ripple Rejection:

   • The ripple rejection is 70dB, effectively filtering out noise from the input power supply.

Additional Notes:

• Always use appropriate decoupling capacitors on both the input and output to ensure stable operation.
• For optimal performance, place the device close to the load and use short, wide traces for power connections.
• Refer to the datasheet for detailed application circuits and further guidelines.