Instructions for Using the CD74HCT4094E:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the operating range of 2.0 V to 6.0 V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Input Signals:

   • Apply logic high (V_IH) signals within the range of 3.5 V to V_CC.
   • Apply logic low (V_IL) signals within the range of 0 V to 1.5 V.
   • Ensure input currents (I_IH and I_IL) do not exceed -1 μA.

3. Output Signals:

   • The output voltage (V_OH) when high should be between 2.4 V and V_CC - 0.5 V.
   • The output voltage (V_OL) when low should be between 0 V and 0.4 V.
   • Ensure output currents (I_OH and I_OL) do not exceed -4.0 mA (high) and 8.0 mA (low).

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically between 22 ns and 38 ns at V_CC = 4.5 V and f_in = 10 MHz.

5. Power Dissipation:

   • Ensure the power dissipation (P_D) does not exceed 500 mW to avoid overheating.

6. Handling:

   • Handle the device with care to avoid static damage.
   • Use appropriate decoupling capacitors near the power supply pins to ensure stable operation.

7. Application:

   • The CD74HCT4094E is commonly used in shift register applications for serial-to-parallel data conversion.
   • Connect the serial data input (SI), clock (CP), and output enable (OE) pins as required by your application.
   • Use the storage register (SR) and output latch (OL) features to manage data storage and output timing.