Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • For a low input signal, ensure the voltage (V_IL) is below 0.8V when V_CC is between 4.5V and 5.5V.
   • For a high input signal, ensure the voltage (V_IH) is above 2.0V when V_CC is between 4.5V and 5.5V.

3. Output Signals:

   • The output low voltage (V_OL) should not exceed 0.1V when sourcing 20mA current.
   • The output high voltage (V_OH) should be at least 4.4V when sinking -0.4mA current.

4. Propagation Delay:

   • The propagation delay time (t_p) should be less than or equal to 15ns at a supply voltage of 4.5V to 5.5V and an input frequency of 10MHz.

5. Power Dissipation:

   • Ensure the power dissipation (P_D) does not exceed 100mW to avoid overheating and potential damage to the device.

6. Handling:

   • Handle the device with care to avoid static discharge which can damage the internal circuits.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

7. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.

8. Mounting:

   • Ensure proper mounting and soldering techniques to maintain the integrity of the connections and prevent mechanical stress on the device.

9. Testing:

   • Test the device under controlled conditions to verify its performance before integrating it into a larger system.