Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 3.6V.
   • The programming voltage (V_PP) should be between 12.0V and 13.0V.

2. Current Considerations:

   • During standby, the current consumption (I_CC(STBY)) is typically 1.0μA.
   • In active mode, the current consumption (I_CC(ACTIVE)) is typically 20μA.
   • During write operations, the current consumption (I_CC(WRITE)) is typically 200μA.

3. Programming and Erasing:

   • The typical programming time (t_PROG) is 10ms.
   • The typical erase time (t_ERASE) is 5 seconds.
   • Ensure the programming voltage (V_PP) is applied correctly during these operations.

4. Temperature Ranges:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_STORAGE) is from -55°C to 125°C.

5. Data Retention:

   • The data retention is guaranteed for at least 10 years under normal operating conditions (V_CC = 3.3V, T_A = 25°C).

6. Input/Output Characteristics:

   • The output high voltage (V_OH) should be at least 2.4V when I_O = -1.0mA.
   • The output low voltage (V_OL) should not exceed 0.4V when I_O = 1.0mA.
   • The input leakage current (I_IL) is typically 1.0μA.

7. Handling and Storage:

   • Handle the device with care to avoid electrostatic discharge (ESD).
   • Store the device in a dry, cool place within the specified storage temperature range.

8. Mounting and Soldering:

   • Follow recommended soldering profiles to ensure reliable connections.
   • Avoid excessive heat and mechanical stress during mounting.

9. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Regularly check for any signs of wear or damage.

For detailed specifications and additional information, refer to the datasheet provided by the manufacturer.