Below is the parameter table and instructions for the DS2016-100.

DS2016-100 Parameter Table

Instructions for DS2016-100

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 2.0V to 5.5V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Temperature Considerations:

   • The device operates within the temperature range of -40°C to 85°C.
   • Store the device within the temperature range of -65°C to 150°C.

3. Input and Output Handling:

   • Ensure input leakage current does not exceed 1μA.
   • The output low voltage (VOL) should be between 0V and 0.8V.
   • The output high voltage (VOH) should be between 2.4V and 5.0V.
   • The maximum output current (IOH) is 20mA when high, and the maximum output current (IOL) is -20mA when low.

4. Timing:

   • The propagation delay time (tpd) is typically 10ns with a maximum of 25ns.

5. Power Consumption:

   • The typical power consumption (ICC) is 1μA, with a maximum of 5μA.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place within the specified storage temperature range.

7. Mounting and Soldering:

   • Follow standard surface mount technology (SMT) guidelines for mounting and soldering.
   • Ensure proper thermal management to prevent overheating during operation.

8. Testing:

   • Test the device under typical operating conditions to ensure it meets the specified parameters.

By following these instructions, you can ensure optimal performance and reliability of the DS2016-100.