Share:
Specifications
SKU: 1458701
Triple Noninverters
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | Operating | 1.2 | - | 5.5 | V |
| Input Low Voltage | VIL | VCC = 1.8V | 0.45 | - | - | V |
| Input High Voltage | VIH | VCC = 1.8V | - | - | 1.35 | V |
| Output Low Voltage | VOL | IOL = 4mA, VCC = 1.8V | 0.4 | - | - | V |
| Output High Voltage | VOH | IOH = -4mA, VCC = 1.8V | - | - | 1.4 | V |
| Propagation Delay Time | tpd | VCC = 1.8V, VOH = 1.4V, VOL = 0.4V | - | 1.6 | - | ns |
| Power Dissipation | PD | Continuous | - | - | 300 | mW |
| Operating Temperature | TOP | Commercial Grade | -40 | - | 85 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 1.2V to 5.5V.
- Connect the ground (GND) pin to a stable reference ground.
Input Signals:
- For reliable operation, input low voltages (VIL) should be below 0.45V when VCC is 1.8V.
- Input high voltages (VIH) should be above 1.35V when VCC is 1.8V.
Output Signals:
- The output low voltage (VOL) should not exceed 0.4V when sourcing 4mA at VCC = 1.8V.
- The output high voltage (VOH) should be at least 1.4V when sinking -4mA at VCC = 1.8V.
Propagation Delay:
- The propagation delay time (tpd) is typically 1.6ns under standard conditions (VCC = 1.8V).
Thermal Considerations:
- The maximum power dissipation (PD) is 300mW. Ensure adequate heat dissipation if operating near this limit.
Temperature Range:
- The device is designed to operate within the commercial temperature range of -40°C to 85°C.
Handling:
- Handle the device with care to avoid static damage. Use proper ESD protection measures during handling and installation.
Mounting:
- Follow the recommended PCB layout and mounting guidelines provided by the manufacturer to ensure optimal performance and reliability.
Inquiry - HD74LV2G34AUSE
