Share:
Specifications
SKU: 1463244
CMOS SRAM 256K-BIT(32KX8)
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | N341256SJ-15 |
| Type | Component Type | Capacitor |
| Capacitance | Nominal Capacitance | 10 μF |
| Voltage Rating | Maximum DC Voltage | 16 V |
| Tolerance | Capacitance Tolerance | ±10% |
| Temperature Range | Operating Temperature | -55°C to +85°C |
| Case Size | Physical Dimensions | 12.5 mm x 20 mm |
| Termination | Lead Type | Radial |
| Dielectric Material | Insulating Material | Aluminum Oxide |
| ESR (Equivalent Series Resistance) | Maximum ESR at 100 kHz | 0.15 Ω |
| Dissipation Factor | Maximum Dissipation Factor at 120 Hz | 0.10 |
| Mounting Style | Installation Method | Through-Hole |
| Compliance | Regulatory Standards | RoHS, REACH |
Instructions for Use:
- Handling: Handle the capacitor with care to avoid physical damage. Avoid excessive bending or twisting of the leads.
- Polarity: Ensure correct polarity when installing the capacitor. The positive lead is typically longer and marked on the body.
- Soldering: Use a soldering iron with a temperature not exceeding 350°C. Soldering time should not exceed 3 seconds per connection.
- Mounting: Insert the leads into the PCB holes and bend them slightly to secure the capacitor before soldering.
- Orientation: Place the capacitor in the correct orientation as indicated by the polarity marks on the PCB.
- Inspection: After soldering, inspect the connections for proper solder flow and absence of shorts or bridges.
- Storage: Store the capacitors in a dry, cool place away from direct sunlight and sources of heat.
- Testing: Before final assembly, test the capacitance and ESR values using a multimeter or LCR meter to ensure they meet the specified parameters.
Inquiry - N341256SJ-15
