Share:
Specifications
SKU: 1536463
FUJI BASE DRIVE MODULE
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Input Voltage | Vcc | - | 4.5 | - | 20 | V |
| Input Current | Iin | - | - | 1 | 10 | mA |
| Output Voltage | Vout | - | - | 12 | 18 | V |
| Output Current | Iout | - | - | 1 | 5 | A |
| Isolation Voltage | Vi-o | 1 minute, 50/60 Hz | - | - | 2500 | Vrms |
| Operating Temp. | Topr | - | -40 | - | 85 | °C |
| Storage Temp. | Tstg | - | -40 | - | 125 | °C |
| Humidity | RH | Non-condensing | - | - | 95 | % |
| Efficiency | η | - | - | 80 | - | % |
Instructions for Use
Power Supply:
- Connect the input voltage (Vcc) to the appropriate power source within the range of 4.5V to 20V.
- Ensure the input current does not exceed 10mA.
Output Configuration:
- The output voltage (Vout) is typically between 12V and 18V.
- The maximum output current (Iout) is 5A. Ensure the load does not exceed this limit to avoid damage.
Isolation:
- The device provides isolation up to 2500Vrms for 1 minute at 50/60 Hz. This ensures safety in high-voltage applications.
Temperature and Environment:
- Operate the device within the temperature range of -40°C to 85°C for optimal performance.
- Store the device within the temperature range of -40°C to 125°C.
- Ensure the relative humidity does not exceed 95% to prevent condensation.
Efficiency:
- The typical efficiency of the device is 80%. Monitor the power consumption and heat dissipation accordingly.
Handling and Installation:
- Handle the device with care to avoid mechanical damage.
- Follow standard electrical safety practices during installation and operation.
- Ensure proper ventilation to dissipate heat generated during operation.
Troubleshooting:
- If the device fails to operate, check the input voltage and current.
- Verify the connections and ensure they are secure.
- If issues persist, consult the datasheet or contact the manufacturer for further assistance.
Inquiry - EXB359
