Instructions for Use

1. Input Connection:

   • Connect the positive (+) input terminal to the positive terminal of your power supply.
   • Connect the negative (-) input terminal to the negative terminal of your power supply.

2. Output Adjustment:

   • Use a small flathead screwdriver to adjust the potentiometer on the module.
   • Turn the potentiometer clockwise to increase the output voltage.
   • Turn the potentiometer counterclockwise to decrease the output voltage.
   • Measure the output voltage with a multimeter to ensure it is set to the desired level.

3. Output Connection:

   • Connect the positive (+) output terminal to the load or device you want to power.
   • Connect the negative (-) output terminal to the ground of the load or device.

4. Protection Features:

   • The module has built-in protection against overload, short circuit, and over temperature.
   • In case of any fault, the module will automatically shut down to prevent damage.

5. Mounting:

   • The module can be mounted using the provided mounting holes.
   • Ensure proper ventilation to avoid overheating, especially under high load conditions.

6. Storage:

   • Store the module in a dry, cool place when not in use.
   • Avoid exposure to extreme temperatures and humidity.

7. Troubleshooting:

   • If the output voltage is not as expected, check the input voltage and connections.
   • If the module shuts down frequently, check for short circuits or excessive load.
   • If the module is hot to the touch, reduce the load or improve ventilation.