Instructions for Use:

1. Input Connection:

   • Connect the input voltage (VIN) to the positive terminal and ground to the negative terminal.
   • Ensure the input voltage is within the specified range (4.5V to 42V).

2. Output Connection:

   • Connect the output voltage (VOUT) to the load.
   • The output voltage is fixed at 5V.

3. Heat Dissipation:

   • For optimal performance, ensure adequate heat dissipation, especially when operating at high output currents.
   • Use a heatsink if necessary to maintain the junction temperature below the maximum operating temperature.

4. Capacitors:

   • Use appropriate input and output capacitors to stabilize the circuit and reduce ripple.
   • Recommended values: 10μF ceramic capacitor on the input and 10μF ceramic capacitor on the output.

5. Layout Considerations:

   • Keep the input and output capacitors as close as possible to the PM100RLB060 to minimize parasitic inductance.
   • Use wide traces for power connections to reduce resistance and voltage drop.

6. Protection:

   • The PM100RLB060 includes built-in overcurrent and thermal protection.
   • Do not exceed the maximum output current or operating temperature to avoid damage.

7. Testing:

   • Before finalizing the design, test the module under various load conditions to ensure stability and performance.
   • Measure the output voltage, current, and temperature to verify that they meet the specifications.

8. Storage:

   • Store the PM100RLB060 in a dry, cool place away from direct sunlight and corrosive environments.
   • Avoid exposing the device to temperatures outside the storage temperature range (-40°C to 125°C).