Below is the parameter table and instructions for the CD4538BCM Monostable Multivibrator.

Parameter Table

Instructions

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 3.0V to 18.0V. The device may not function correctly outside this range.

2. Input Levels (V_IH, V_IL):

   • The input high level (V_IH) should be between 2.0V and 15.0V.
   • The input low level (V_IL) should be between 0.8V and 3.0V.

3. Output Levels (V_OH, V_OL):

   • The output high level (V_OH) will be between V_CC - 1.5V and V_CC - 0.5V.
   • The output low level (V_OL) will be between 0.0V and 1.0V.

4. Propagation Delay Time (t_d):

   • The propagation delay time is the time it takes for the output to change state after the input changes. It ranges from 50ns to 200ns.

5. Pulse Width (t_min, t_max):

   • The minimum pulse width for inputs A and B is 1.0μs.
   • The maximum pulse width is 1000μs.

6. Power Dissipation (P_D):

   • The maximum power dissipation is 100mW. Ensure that the device is not operated beyond this limit to avoid damage.

7. Operating Temperature (T_A):

   • The operating temperature range is from -40°C to 85°C. Ensure that the device is used within this range to maintain reliable operation.

8. Storage Temperature (T_STG):

   • The storage temperature range is from -65°C to 150°C. Store the device in this range to prevent damage.

9. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Store the device in a dry, cool place away from direct sunlight and sources of heat.

10. Circuit Design:

    • When designing circuits using the CD4538BCM, ensure proper decoupling capacitors are used to stabilize the supply voltage and reduce noise.
    • Use appropriate pull-up or pull-down resistors for inputs to ensure stable logic levels.

By following these parameters and instructions, you can ensure reliable and efficient operation of the CD4538BCM Monostable Multivibrator in your electronic designs.