Share:
Specifications
SKU: 1706404
High-Speed, Low-Glitch D/CMOS Analog Switches
| Parameter | Description | Value |
|---|---|---|
| Part Number | Device Identifier | DG611DJ |
| Type | Component Type | Analog Switch |
| Function | Basic Functionality | Single SPDT (Single Pole Double Throw) Switch |
| Supply Voltage (Vdd) | Operating Voltage Range | 2.7 V to 5.5 V |
| Control Voltage (Vcc) | Control Logic Supply Voltage | 2.7 V to 5.5 V |
| Channel Resistance (Ron) | On-State Resistance | 3.5 Ω (Max) at Vdd = 5 V, Ta = 25°C |
| Off-State Leakage Current (Ioff) | Maximum Leakage Current When Off | ±10 nA (Max) at Vdd = 5 V, Ta = 25°C |
| Signal Bandwidth | Frequency Response | 120 MHz (Typ) at Vdd = 5 V, Ta = 25°C |
| Power Consumption | Quiescent Current | 1 μA (Max) at Vdd = 5 V, Ta = 25°C |
| Operating Temperature (Ta) | Ambient Operating Temperature Range | -40°C to +85°C |
| Storage Temperature (Tstg) | Storage Temperature Range | -65°C to +150°C |
| Package | Physical Package Type | TSSOP-8 |
| Polarity | Control Input Polarity | Active High |
Instructions for Use:
Power Supply:
- Ensure that the supply voltage (Vdd) is within the specified range of 2.7 V to 5.5 V.
- The control logic supply voltage (Vcc) should also be within the same range.
Control Input:
- Apply a high logic level to the control input to turn the switch on.
- Apply a low logic level to the control input to turn the switch off.
Signal Handling:
- The device can handle signals up to 120 MHz with minimal distortion.
- Keep the signal levels within the power supply range to avoid damage.
Thermal Management:
- Operate the device within the ambient temperature range of -40°C to +85°C.
- Store the device in an environment where the temperature does not exceed -65°C to +150°C.
Installation:
- Use appropriate soldering techniques to ensure reliable connections.
- Avoid excessive heat during soldering to prevent damage to the device.
Testing:
- Measure the channel resistance (Ron) to verify proper operation.
- Check for off-state leakage current (Ioff) to ensure the switch is effectively isolated when off.
Handling:
- Handle the device with care to avoid static discharge.
- Follow ESD (Electrostatic Discharge) precautions to prevent damage.
For detailed specifications and further information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - DG611DJ
