Share:
Specifications
SKU: 1716221
FM Noise CancellerFM
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Part Number | Component Identifier | LA2110 | - |
| Type | Component Type | Linear Regulator | - |
| Output Voltage | Fixed Output Voltage | 3.3 | V |
| Input Voltage Range | Operating Input Voltage Range | 4.5 to 20 | V |
| Output Current | Maximum Continuous Output Current | 1.5 | A |
| Quiescent Current | Quiescent Current | 5 | mA |
| Dropout Voltage | Dropout Voltage at 1.5A | 1.2 | V |
| Operating Temperature Range | Ambient Operating Temperature Range | -40 to 125 | °C |
| Storage Temperature Range | Storage Temperature Range | -65 to 150 | °C |
| Package | Package Type | TO-220 | - |
| Thermal Resistance (θJA) | Junction-to-Air Thermal Resistance | 65 | °C/W |
| Thermal Resistance (θJC) | Junction-to-Case Thermal Resistance | 5 | °C/W |
Instructions for Use:
Power Supply Connection:
- Connect the input voltage to the VIN pin.
- Connect the output voltage to the VOUT pin.
- Ensure the ground (GND) pin is connected to the system ground.
Capacitor Requirements:
- Place a 10μF ceramic capacitor between VIN and GND as close to the regulator as possible.
- Place a 10μF ceramic capacitor between VOUT and GND to stabilize the output.
Heat Dissipation:
- For applications where the power dissipation is high, use a heatsink or ensure adequate airflow around the component.
- Calculate the power dissipation using the formula: ( P = (V_ - V_) times I_ ).
Overvoltage Protection:
- Ensure that the input voltage does not exceed the maximum rated input voltage to avoid damage to the regulator.
Reverse Polarity Protection:
- The regulator does not have built-in reverse polarity protection. Use a diode in series with the input to protect against reverse voltage.
Layout Considerations:
- Keep the traces from the input and output capacitors to the regulator as short as possible to minimize parasitic inductance.
- Use wide traces for the ground plane to reduce resistance and improve thermal performance.
Storage and Handling:
- Store the component in a dry, cool place.
- Handle with care to avoid static discharge, which can damage the component.
Regulator Stability:
- The regulator is stable with ceramic capacitors. Avoid using electrolytic capacitors without additional ESR (Equivalent Series Resistance) to maintain stability.
Testing:
- Before finalizing the design, test the regulator under all expected operating conditions to ensure it meets the required specifications.
Inquiry - LA2110
