Share:
Specifications
SKU: 1721695
NPN SILICON RF POWER TRANSISTOR
| Parameter | Description | Value |
|---|---|---|
| Part Number | Unique identifier for the component | BLX13 |
| Type | Component type | [Type] |
| Package | Physical package type | [Package] |
| Operating Voltage | Range of voltages over which the component can operate | [Voltage Range] |
| Operating Current | Maximum current the component can handle | [Current] |
| Power Rating | Maximum power the component can dissipate | [Power] |
| Temperature Range | Operating temperature range | [Temperature] |
| Storage Temperature | Range of temperatures for storage | [Storage Temp] |
| Mounting Type | Method of mounting the component | [Mounting] |
| Lead Pitch | Distance between leads | [Pitch] |
| Lead Length | Length of the leads | [Length] |
| Lead Diameter | Diameter of the leads | [Diameter] |
| Insulation Material | Material used for insulation | [Insulation] |
| Compliance | Standards or regulations the component complies with | [Compliance] |
Instructions for Using BLX13
Preparation:
- Ensure that the operating environment meets the specified temperature and humidity requirements.
- Verify that the power supply voltage is within the operating voltage range.
Mounting:
- Use the appropriate soldering technique to mount the component on the PCB.
- Ensure that the lead pitch and lead length match the PCB design.
- Avoid excessive heat during soldering to prevent damage to the component.
Connection:
- Connect the component to the circuit according to the schematic diagram.
- Ensure that the polarity (if applicable) is correctly observed.
Testing:
- After mounting and connecting the component, perform a visual inspection to ensure proper installation.
- Test the circuit to verify that the component is functioning within the specified parameters.
Storage:
- Store the component in a dry, cool place away from direct sunlight.
- Keep the component in its original packaging until ready for use to protect against static discharge.
Handling:
- Handle the component with care to avoid physical damage.
- Use anti-static wrist straps and mats to prevent electrostatic discharge.
Disposal:
- Dispose of the component according to local environmental regulations.
- Recycle the component if possible.
Inquiry - BLX13
