Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
   • Use appropriate decoupling capacitors (typically 0.1μF) close to the power pins to reduce noise and stabilize the power supply.

2. Input Signals:

   • Input signals should be within the valid logic levels: V_IL ≤ 0.8V for a low input and V_IH ≥ 2.0V for a high input.
   • Avoid driving inputs with voltages outside the supply range to prevent damage.

3. Output Signals:

   • The output high voltage (V_OH) should be at least 2.7V when sinking 0.4mA.
   • The output low voltage (V_OL) should be no more than 0.5V when sourcing 16mA.
   • Ensure that the load connected to the outputs does not exceed the maximum current ratings.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 15ns under standard conditions (V_CC = 5V, T_A = 25°C). This value can vary with temperature and supply voltage.

5. Temperature Considerations:

   • Operate the device within the commercial temperature range of 0°C to 70°C.
   • Store the device within the storage temperature range of -65°C to 150°C to avoid damage.

6. Power Dissipation:

   • The maximum power dissipation (P_D) is 500mW. Ensure adequate heat dissipation if operating near this limit to prevent overheating.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

8. Mounting:

   • Mount the device on a PCB with proper soldering techniques to ensure reliable connections.
   • Avoid excessive mechanical stress on the leads during assembly.

By following these guidelines, you can ensure optimal performance and reliability of the SN74S289AN device.