Share:
Specifications
SKU: 1730634
IC-CMOS PLD
| Parameter | Description | Value |
|---|---|---|
| Device Type | Complex Programmable Logic Device (CPLD) | GAL16V8A |
| Package | Low Profile Plastic Leaded Chip Carrier (PLCC) | 20-Pin PLCC |
| Operating Voltage | Supply Voltage Range | 4.5V to 5.5V |
| Operating Temperature | Junction Temperature Range | -40°C to +85°C |
| Programmable Elements | Number of Macrocells | 16 |
| Inputs | Number of Inputs | 8 |
| Outputs | Number of Outputs | 8 |
| I/O Pins | Total I/O Pins | 8 |
| Programming Method | Programming Technology | UV Erasable PROM |
| Programming Voltage | Programming Voltage (VPP) | 12.75V to 13.25V |
| Programming Current | Programming Current (IPP) | 5mA to 25mA |
| Erasure Time | Typical Erasure Time (UV Exposure) | 15 to 30 minutes |
| Data Retention | Data Retention at Maximum Operating Temperature | 10 years |
| Propagation Delay | Maximum Propagation Delay (tPD) | 10ns |
| Power Consumption | Maximum Power Consumption (Active) | 150mW |
| Standby Current | Maximum Standby Current | 10μA |
| Output Drive | Output Drive Capability (Source/Sink) | 20mA/20mA |
| Input Leakage Current | Maximum Input Leakage Current | ±1μA |
| Output Leakage Current | Maximum Output Leakage Current | ±100nA |
| Storage Temperature | Storage Temperature Range | -65°C to +150°C |
| RoHS Compliance | RoHS Compliant | Yes |
Instructions for Use
Handling and Storage:
- Handle the GAL16V8A-10LNC with care to avoid static damage.
- Store in a dry environment within the specified storage temperature range.
Power Supply:
- Ensure the supply voltage is within the specified range (4.5V to 5.5V).
- Connect a decoupling capacitor (0.1μF) close to the VCC and GND pins to reduce noise.
Programming:
- Use a compatible programmer that supports UV erasable PROM technology.
- Apply the programming voltage (VPP) of 12.75V to 13.25V.
- Program the device using the desired logic configuration.
- After programming, expose the device to UV light for 15 to 30 minutes to erase the previous data if needed.
Operation:
- Verify the correct operation by testing the inputs and outputs.
- Ensure the propagation delay (tPD) is within the specified maximum of 10ns.
Mounting:
- Solder the device onto the PCB following the recommended soldering profile.
- Avoid excessive heat during soldering to prevent damage to the device.
Testing:
- Perform functional tests to ensure all inputs and outputs are working as expected.
- Check the power consumption and standby current to ensure they are within the specified limits.
Documentation:
- Refer to the datasheet and application notes for detailed information on specific applications and advanced features.
By following these instructions, you can ensure reliable and efficient use of the GAL16V8A-10LNC CPLD.
(For reference only)Inquiry - GAL16V8A-10LNC
