Share:
Specifications
SKU: 1732867
Quad Bilateral Switch; Package: SOIC; No of Pins: 14; Container: Rail
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD - VSS | Continuous operation | 3 | 15 | V | |
| Supply Current (each switch off) | IDD | VDD = 15V, VSS = 0V, TA = 25°C | - | 0.5 | 1 | μA |
| Input Voltage Range | VI | VSS - 0.5 | VDD + 0.5 | V | ||
| Output Leakage Current | IOL, IOH | VDD = 15V, VSS = 0V, TA = 25°C | - | 0.1 | 1 | nA |
| On-State Resistance | RON | VDD = 15V, VSS = 0V, TA = 25°C | 125 | 180 | 250 | Ω |
| Off-State Resistance | ROFF | VDD = 15V, VSS = 0V, TA = 25°C | 10^9 | Ω | ||
| Switching Time | tpd | VDD = 15V, VSS = 0V, TA = 25°C | 8 | 12 | 18 | ns |
| Operating Temperature | TA | -40 | 85 | °C | ||
| Storage Temperature | TSTG | -65 | 150 | °C |
Instructions for Using CD4066BCM
Power Supply:
- Ensure the supply voltage (VDD - VSS) is within the range of 3V to 15V.
- Connect VDD to the positive supply and VSS to the negative supply or ground.
Input Signals:
- The input signals (control signals) should be within the range of VSS - 0.5V to VDD + 0.5V.
- Apply logic high (VDD) to turn on the switch and logic low (VSS) to turn off the switch.
Output Handling:
- When the switch is on, the output resistance (RON) is typically around 180Ω at 15V supply.
- When the switch is off, the output leakage current (IOL, IOH) is very low, typically less than 1nA.
Temperature Considerations:
- The device can operate over a temperature range from -40°C to 85°C.
- Store the device in an environment with temperatures ranging from -65°C to 150°C.
Handling Precautions:
- Handle the device with care to avoid static damage.
- Use appropriate ESD protection when handling the device.
Layout and Mounting:
- Ensure proper PCB layout to minimize noise and interference.
- Follow standard soldering practices for surface mount devices (SMD).
Testing:
- Test the device under typical operating conditions to ensure it meets the specified parameters.
- Use a multimeter to measure the on-state resistance and off-state resistance.
By following these instructions, you can effectively use the CD4066BCM in your electronic circuits.
(For reference only)Inquiry - CD4066BCM
