Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range (2.7V to 5.5V).
   • Connect the Vcc pin to the power source and GND to the ground.

2. Input Logic Levels:

   • The input voltage (Vin) should be within the range of 0V to Vcc.
   • Use logic high (Vcc) to activate the output and logic low (0V) to deactivate it.

3. Output Configuration:

   • Each output channel can sink up to 50mA of current.
   • The output voltage (Vout) will match the input logic level (0V or Vcc).

4. Thermal Management:

   • Ensure the operating temperature (Topr) remains between -40°C and 85°C.
   • For extended storage, keep the device within the storage temperature range (-55°C to 150°C).

5. Signal Timing:

   • The propagation delay (tpd) is typically 15ns.
   • The rise time (tr) and fall time (tf) are both typically 10ns.

6. ESD Protection:

   • Handle the device with care to avoid ESD damage.
   • The device has an ESD rating of 2000V according to the Human Body Model (HBM).

7. Mounting and Handling:

   • Follow standard surface mount technology (SMT) procedures for mounting.
   • Avoid applying excessive force or heat during soldering.

8. Testing:

   • Before final assembly, test the device to ensure it meets the specified parameters.
   • Use a multimeter to check the continuity and resistance of the channels.

9. Application Notes:

   • The SH2006C is suitable for driving LEDs, relays, and other low-power devices.
   • For high-frequency applications, consider the rise and fall times to avoid signal distortion.