Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Connect Vcc to the power supply and GND to ground.

2. Input Signals:

   • Apply input signals within the logic levels defined by the device.
   • Ensure input currents do not exceed the maximum ratings.

3. Output Signals:

   • The device can source up to 4.0mA and sink up to 16.0mA.
   • Ensure load resistances are appropriate to avoid exceeding these limits.

4. Propagation Delay:

   • Account for the propagation delay time (tpd) in your timing calculations, which can range from 10ns to 30ns.

5. Thermal Management:

   • Operate the device within the specified temperature range (-40°C to 85°C).
   • Store the device in environments where temperatures do not exceed the storage temperature range (-65°C to 150°C).

6. Handling:

   • Handle the device with care to avoid static discharge.
   • Follow proper soldering techniques to ensure reliable connections.

7. Testing:

   • Test the device under typical operating conditions to verify functionality.
   • Use a multimeter or oscilloscope to measure voltages and currents as needed.

8. Storage:

   • Store the device in a dry, cool place to prevent damage.
   • Keep the device in its original packaging until ready for use.