Share:
Specifications
SKU: 1743582
Logic IC
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | Operating | 3 | 18 | V | |
| Input Voltage (High) | VIH | VIL ≤ VIN ≤ VDD | 0.7VDD | VDD | V | |
| Input Voltage (Low) | VIL | 0 ≤ VIN ≤ VIH | 0 | 0.3VDD | V | |
| Output Voltage (High) | VOH | IO = -1mA | 0.9VDD | VDD - 0.5 | V | |
| Output Voltage (Low) | VOL | IO = 1mA | 0 | 0.1VDD + 0.5 | V | |
| Propagation Delay Time | tpd | VDD = 15V, fIN = 1MHz | 25 | 35 | 50 | ns |
| Power Dissipation | PD | Continuous | 100 | mW | ||
| Operating Temperature | TA | Commercial | 0 | 70 | °C | |
| Storage Temperature | TSTG | -65 | 150 | °C |
Instructions for Using CD4096BE:
Power Supply:
- Ensure the supply voltage (VDD) is within the range of 3V to 18V.
- Connect the ground (GND) pin to a stable reference point.
Input Signals:
- For a logic high input, ensure the input voltage (VIN) is at least 0.7 times the supply voltage (VDD).
- For a logic low input, ensure the input voltage (VIN) is no more than 0.3 times the supply voltage (VDD).
Output Signals:
- The output voltage (VOUT) will be close to VDD for a logic high and close to 0V for a logic low.
- Ensure the load current (IO) does not exceed the specified limits to avoid damage.
Propagation Delay:
- The propagation delay time (tpd) is the time it takes for a change in the input signal to affect the output. It varies with supply voltage and temperature.
Thermal Considerations:
- The device can operate continuously with a power dissipation up to 100mW.
- Ensure the operating temperature (TA) is between 0°C and 70°C for commercial applications.
- Store the device in a temperature range between -65°C and 150°C.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal circuits.
- Use appropriate ESD protection measures when handling or soldering the device.
Testing:
- Test the device under typical operating conditions to ensure it meets the specified parameters.
- Use a multimeter to verify the supply voltage and output levels.
By following these instructions, you can ensure reliable operation of the CD4096BE.
(For reference only)Inquiry - CD4096BE
