Share:
Specifications
SKU: 1758999
Supply Voltage Supervisor w/Watchdog input and manual reset 5-SOT-23 -40 to 85
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | - | 4.5 | 5.0 | 5.5 | V |
| Input High Voltage | VIH | II = -0.1 mA | 2.0 | - | 5.5 | V |
| Input Low Voltage | VIL | II = 0.1 mA | 0 | - | 0.8 | V |
| Output High Voltage | VOH | IO = -0.4 mA | 2.7 | - | 5.5 | V |
| Output Low Voltage | VOL | IO = 16 mA | 0 | - | 0.5 | V |
| Propagation Delay Time | tpd | VCC = 5V, TA = 25°C | - | 25 | 35 | ns |
| Power Dissipation | PD | - | - | 150 | - | mW |
| Operating Temperature | TA | - | -40 | - | 85 | °C |
| Storage Temperature | TSTG | - | -65 | - | 150 | °C |
Instructions for Use
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 4.5V to 5.5V.
- Connect the ground (GND) pin to a stable 0V reference.
Input Signals:
- Apply input signals that meet the specified high (VIH) and low (VIL) voltage levels.
- Avoid exceeding the maximum input voltage to prevent damage to the device.
Output Signals:
- The output high (VOH) and low (VOL) voltages should be within the specified limits.
- Ensure the load connected to the output does not exceed the maximum current ratings.
Propagation Delay:
- The propagation delay time (tpd) is typically 25ns at room temperature (25°C). Consider this when designing your circuit timing.
Thermal Management:
- The device can dissipate up to 150mW of power. Ensure adequate heat dissipation if operating near the maximum power dissipation.
- Operate the device within the recommended temperature range (-40°C to 85°C) to ensure reliable performance.
Storage:
- Store the device in a dry environment with temperatures between -65°C and 150°C to prevent damage.
Handling:
- Handle the device with care to avoid static discharge, which can damage sensitive components.
- Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.
Inquiry - MC74F182N
