Share:
Specifications
SKU: 1759171
NiCd Gas Gauge For High Discharge Rates >5A, Small Pack Capacities <2Ah 16-SOIC 0 to 70
| Parameter | Symbol | Min | Typical | Max | Unit | Conditions/Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5.0 | 5.5 | V | |
| Input High Voltage | VIH | 2.0 | - | 5.5 | V | |
| Input Low Voltage | VIL | 0 | - | 0.8 | V | |
| Output High Voltage | VOH | 2.4 | 3.5 | 5.0 | V | IOL = 0.4 mA |
| Output Low Voltage | VOL | 0 | 0.4 | 0.5 | V | IOH = -0.4 mA |
| Propagation Delay Time (High to Low) | tpdLH | - | 15 | 22 | ns | VCC = 5V, TA = 25°C |
| Propagation Delay Time (Low to High) | tpdHL | - | 15 | 22 | ns | VCC = 5V, TA = 25°C |
| Power Dissipation | PD | - | - | 500 | mW | Per Package |
| Operating Temperature Range | TA | -40 | - | 85 | °C | |
| Storage Temperature Range | TSTG | -65 | - | 150 | °C |
Instructions for Use:
Supply Voltage:
- Ensure the supply voltage (VCC) is within the range of 4.5V to 5.5V. Operating outside this range can damage the device.
Input Levels:
- For a valid high input (VIH), the voltage should be at least 2.0V.
- For a valid low input (VIL), the voltage should not exceed 0.8V.
Output Levels:
- The output high voltage (VOH) should be at least 2.4V when sourcing 0.4 mA.
- The output low voltage (VOL) should not exceed 0.5V when sinking 0.4 mA.
Propagation Delay:
- The typical propagation delay times (tpdLH and tpdHL) are 15 ns at 25°C with a 5V supply. These values can vary between 15 ns and 22 ns.
Power Dissipation:
- The maximum power dissipation per package is 500 mW. Ensure adequate heat dissipation to avoid overheating.
Temperature Ranges:
- The operating temperature range (TA) is from -40°C to 85°C.
- The storage temperature range (TSTG) is from -65°C to 150°C.
Handling:
- Handle the device with care to avoid static damage. Use proper ESD protection measures.
Mounting:
- Follow recommended soldering profiles and mounting guidelines to ensure reliable performance and prevent damage during assembly.
Inquiry - SN74F280BN
