Instructions for Use

1. Installation:

   • Ensure the module is installed in a suitable enclosure with adequate ventilation.
   • Mount the module on a DIN rail using the provided clips.

2. Wiring:

   • Connect the input signals to the appropriate terminals on the module.
   • Ensure all connections are secure and meet the specified voltage and current ratings.
   • Use shielded cables for noise-sensitive applications.

3. Power Supply:

   • Connect the 24 VDC power supply to the designated power terminals.
   • Verify the polarity before powering on the module.

4. Configuration:

   • Use the provided software or configuration tool to set up the input channels.
   • Configure each channel according to the application requirements.

5. Operation:

   • Power on the system and monitor the status of the input channels.
   • Check for any error messages or fault indicators.

6. Maintenance:

   • Regularly inspect the module and connections for signs of wear or damage.
   • Clean the module with a soft, dry cloth as needed.

7. Troubleshooting:

   • If an input channel is not responding, check the wiring and ensure the signal is within the specified range.
   • Refer to the user manual for detailed troubleshooting steps and error codes.

8. Safety Precautions:

   • Do not exceed the maximum input voltage or current ratings.
   • Disconnect the power supply before performing any maintenance or repairs.
   • Follow all local electrical codes and safety regulations.