Instructions for Use:

1. Mounting:

   • Ensure that the component is mounted on a clean, flat surface.
   • Use appropriate soldering techniques to avoid thermal damage. The maximum soldering temperature should not exceed 260°C for more than 10 seconds.

2. Electrical Connections:

   • Connect the anode (longer lead) to the positive supply and the cathode (shorter lead) to the ground.
   • Use a current-limiting resistor to ensure the forward current does not exceed the maximum rating.

3. Handling:

   • Handle the component with care to avoid mechanical stress.
   • Avoid touching the leads directly; use tweezers or a similar tool if necessary.

4. Environmental Considerations:

   • Store the component in a dry, cool place to prevent moisture damage.
   • Ensure the operating temperature does not exceed the specified range to maintain performance and longevity.

5. Testing:

   • Test the component using a multimeter set to the diode test mode to verify functionality.
   • Measure the forward voltage and reverse current to ensure they fall within the specified ranges.

6. Application Notes:

   • This LED is suitable for general-purpose indicator applications.
   • For high-brightness applications, ensure adequate heat dissipation by using a heatsink if necessary.