Instructions for Use

1. Power Supply:

   • Ensure the supply voltage is within the specified range of ±2.25V to ±18V or 4.5V to 36V for single supply.
   • Connect the positive supply to pin 8 and the negative supply to pin 4.

2. Input Connections:

   • Connect the non-inverting input (pin 3) and the inverting input (pin 2) to the appropriate signal sources.
   • Use input biasing resistors if necessary to maintain the input bias current within the specified limits.

3. Output Connections:

   • The output is available on pin 6.
   • Ensure the load is within the maximum output current capability of 20 mA.

4. Ground Connection:

   • Connect the ground (GND) to pin 4 for single supply operation, or to a common reference point for dual supply operation.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +125°C to ensure reliable performance.

6. PCB Layout:

   • Place the op-amp close to the power supply decoupling capacitors to minimize noise.
   • Use bypass capacitors (e.g., 0.1 μF) between the power supply pins and ground to filter out high-frequency noise.

7. Stability:

   • Ensure the feedback network is properly designed to maintain stability. Avoid excessive phase shift in the feedback loop.

8. Storage and Handling:

   • Store the device in a dry, static-free environment.
   • Handle with care to avoid damage to the pins and package.

For more detailed information, refer to the datasheet provided by the manufacturer.