Instructions:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling.

2. Soldering:

   • Preheat components to 80°C to 120°C for 3 to 5 minutes before soldering.
   • Solder at a temperature of 260°C for no more than 10 seconds.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Ensure the resistor is mounted on a flat, clean surface.
   • Use a suitable adhesive if necessary to secure the component.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Recommended storage temperature: -10°C to +40°C.
   • Humidity should be kept below 60%.

5. Testing:

   • Test the resistance using a digital multimeter to ensure it meets the specified tolerance.
   • Check for any visual defects or signs of damage before use.

6. Safety:

   • Do not exceed the maximum voltage rating.
   • Avoid exposing the component to temperatures outside the operating range.
   • Follow all local safety regulations and guidelines.