Share:
Specifications
SKU: 1869055
High- Performance Flash PLD
| Parameter | Description | Value |
|---|---|---|
| Device | High-Speed CMOS Complex Programmable Logic Device (CPLD) | ATF16V8BQL-15JC |
| Package | Plastic Quad Flatpack (PQFP) | 44-pin |
| Supply Voltage (VCC) | Operating Supply Voltage | 3.3V to 5.0V |
| Operating Temperature | Industrial Temperature Range | -40°C to +85°C |
| Clock Frequency | Maximum Clock Frequency | 150 MHz |
| Logic Gates | Equivalent Number of Logic Gates | 1,600 |
| Macrocells | Number of Macrocells | 8 |
| Input/Output Pins | Number of I/O Pins | 32 |
| Programmable Terms | Number of Programmable Terms per Macrocell | 16 |
| Power Consumption | Typical Power Consumption at 5V, 150 MHz | 200 mW |
| Programming Voltage | Voltage for In-System Programming | 12.75V |
| Configuration Modes | Modes of Configuration | ISP (In-System Programming), JTAG |
| Standby Current | Standby Current at 5V | 10 μA |
| Storage Temperature | Storage Temperature Range | -65°C to +150°C |
| ESD Protection | Electrostatic Discharge Protection | ±2 kV HBM (Human Body Model) |
| Lead Finish | Lead Finish Option | Tin-Lead (Sn/Pb) |
Instructions for Use
Power Supply:
- Ensure that the supply voltage (VCC) is within the specified range (3.3V to 5.0V).
- Connect VCC to the appropriate pins on the device.
Grounding:
- Connect the ground (GND) pin to a stable ground reference.
Clock Signal:
- Apply the clock signal to the appropriate input pin, ensuring it does not exceed the maximum clock frequency of 150 MHz.
Input/Output Configuration:
- Configure the I/O pins as inputs or outputs based on your application requirements.
- Use the internal pull-up resistors if necessary.
Programming:
- Use the ISP (In-System Programming) mode to program the device in-circuit.
- Alternatively, use JTAG for boundary-scan testing and programming.
- Ensure the programming voltage (12.75V) is applied correctly during the programming process.
Power Consumption:
- Monitor the power consumption to ensure it remains within the typical range of 200 mW at 5V and 150 MHz.
Temperature Considerations:
- Operate the device within the industrial temperature range (-40°C to +85°C).
- Store the device in a temperature-controlled environment (-65°C to +150°C).
ESD Handling:
- Handle the device with care to avoid ESD damage.
- Use proper ESD protection measures, such as wrist straps and grounded work surfaces.
Soldering:
- Solder the device using a lead-free or tin-lead (Sn/Pb) solder, depending on the lead finish option.
- Follow recommended soldering profiles to ensure reliable connections.
Testing:
- Perform functional and boundary-scan tests to verify the correct operation of the device.
- Use the JTAG interface for diagnostic purposes.
By following these instructions, you can ensure the optimal performance and reliability of the ATF16V8BQL-15JC CPLD.
(For reference only)Inquiry - ATF16V8BQL-15JC
