Specifications
SKU: 1881289
RELAY GEN PURPOSE SPST 10A 12V
Parameter | Description | Value |
---|---|---|
Part Number | Full part number | JQ1AP-12V-F |
Type | Relay Type | SPDT |
Voltage | Coil Voltage | 12VDC |
Current | Coil Current | 40mA |
Power Consumption | Coil Power Consumption | 0.48W |
Contact Form | Contact Configuration | 1 Form A |
Contact Rating | Contact Load (Resistive) | 10A at 250VAC |
Insulation Voltage | Insulation Resistance between Contacts and Coil | 1000VAC |
Operating Temperature | Operating Temperature Range | -40°C to 85°C |
Storage Temperature | Storage Temperature Range | -40°C to 125°C |
Switching Capacity | Maximum Switching Capacity | 10A at 250VAC |
Contact Resistance | Initial Contact Resistance | ≤ 50mΩ |
Dielectric Strength | Dielectric Strength | 2500VAC |
Life Expectancy | Mechanical Life | 10,000,000 cycles |
Electrical Life | Electrical Life (at rated load) | 100,000 cycles |
Instructions for Use
Installation:
- Ensure that the relay is installed in a well-ventilated area to prevent overheating.
- Mount the relay on a flat, stable surface to avoid mechanical stress.
Wiring:
- Connect the coil terminals to the control circuit using appropriate wire gauge.
- Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.
Operation:
- Apply the rated voltage to the coil terminals to energize the relay.
- The normally open contact will close, and the normally closed contact will open when the relay is energized.
- When the voltage is removed, the relay will return to its de-energized state.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Clean the contacts with a dry cloth if necessary.
Safety:
- Do not exceed the rated voltage and current specifications.
- Ensure proper grounding of the relay and associated circuits.
- Avoid exposure to moisture and corrosive environments.
Disposal:
- Follow local regulations for the disposal of electronic components.
Inquiry - JQ1AP-12V-F