Instructions

1. Installation:

   • Ensure that the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical stress.
   • Mount the relay on a flat, stable surface using the provided mounting holes or solder lugs.

2. Wiring:

   • Connect the coil terminals to the appropriate 12V DC power supply.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the circuit you wish to control.

3. Operation:

   • When the coil is energized, the relay will switch the contacts from the NC position to the NO position.
   • When the coil is de-energized, the contacts will return to the NC position.

4. Testing:

   • Use a multimeter to verify the continuity between the COM and NC/NO contacts before and after energizing the coil.
   • Ensure that the relay operates smoothly and without any abnormal noise.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry, soft cloth to remove dust and debris.

6. Safety:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Always disconnect the power supply before performing any maintenance or testing.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.