Share:
Specifications
SKU: 1891277
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.7 | 3.3 | 3.6 | V | Power supply voltage |
| Standby Current | ISB | - | 10 | 20 | μA | Current consumption in standby mode |
| Operating Current | IOP | 80 | 120 | 150 | mA | Current consumption in active mode |
| Differential Input Range | VDIFF | 0.2 | 0.8 | 1.0 | Vpp | Differential input voltage range |
| Input Common Mode Range | VICR | 0.4 | 1.65 | 2.9 | V | Input common mode voltage range |
| Output Voltage Swing | VOS | 0.1 | 0.9 | 1.1 | Vpp | Output voltage swing (differential) |
| Slew Rate | SR | 1000 | 1500 | 2000 | V/μs | Maximum slew rate |
| Bandwidth | BW | 300 | 500 | 700 | MHz | 3 dB bandwidth |
| Harmonic Distortion | THD | -60 | -70 | -80 | dB | Total harmonic distortion at 1 kHz |
| Power Dissipation | PD | 0.3 | 0.4 | 0.5 | W | Maximum power dissipation |
| Operating Temperature | TOPR | -40 | 25 | 85 | °C | Operating temperature range |
| Storage Temperature | TSTG | -65 | -40 | 150 | °C | Storage temperature range |
Instructions for Use:
Power Supply:
- Ensure the supply voltage is within the specified range (2.7V to 3.6V).
- Use a stable and clean power source to avoid noise and instability.
Input Signals:
- The differential input range should be between 0.2Vpp and 1.0Vpp.
- The input common mode voltage should be within 0.4V to 2.9V.
Output Configuration:
- The output voltage swing is designed to be between 0.1Vpp and 1.1Vpp.
- Ensure the load impedance is compatible with the output stage to avoid signal degradation.
Thermal Management:
- The device can dissipate up to 0.5W. Ensure adequate heat sinking or cooling if operating near maximum power dissipation.
- Operate the device within the specified temperature range (-40°C to 85°C).
Signal Integrity:
- To minimize harmonic distortion, keep the total harmonic distortion (THD) below -70dB for optimal performance.
- Use proper termination and shielding techniques to reduce electromagnetic interference (EMI).
Standby Mode:
- To enter standby mode, set the appropriate control signals as specified in the datasheet.
- In standby mode, the current consumption will drop to between 10μA and 20μA.
Storage and Handling:
- Store the device in a dry environment within the storage temperature range (-65°C to 150°C).
- Handle the device with care to avoid static discharge and physical damage.
Inquiry - ADV7493CBSTZ-150
