Share:
Specifications
SKU: 1902354
44V Dual High Performance, High Fidelity Audio Operational Amplifier
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 15 | - | 45 | V | Operating supply voltage range |
| Quiescent Current | IQ | - | 2.2 | - | mA | Quiescent current at nominal conditions |
| Output Current | IOUT | - | 300 | - | mA | Maximum output current per channel |
| Output Voltage Swing | VOUT(SWING) | 0.5 | - | 2.0 | V | Output voltage swing from rail to rail |
| Input Voltage Range | VIN | -0.3 | - | VCC + 0.3 | V | Input voltage range relative to supply |
| Input Bias Current | IIB | - | 0.5 | - | nA | Input bias current at room temperature |
| Input Offset Voltage | VOS | - | 0.5 | - | mV | Input offset voltage at room temperature |
| Slew Rate | SR | - | 10 | - | V/μs | Slew rate for large signal transitions |
| Bandwidth | BW | - | 10 | - | MHz | Small-signal bandwidth (G = 1) |
| Power Consumption | PCON | - | 7.2 | - | mW | Power consumption at nominal conditions |
| Operating Temperature | TOP | -40 | - | 125 | °C | Operating temperature range |
Instructions for Using LME49860
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 15V to 45V.
- Use appropriate decoupling capacitors (e.g., 10μF and 0.1μF) close to the power pins to stabilize the supply and reduce noise.
Input Configuration:
- Connect the input signals to the non-inverting and inverting inputs (VIN+ and VIN-).
- Ensure the input voltages are within the specified range of -0.3V to VCC + 0.3V to avoid damage or incorrect operation.
Output Configuration:
- The output can drive loads up to 300mA.
- For optimal performance, ensure the load impedance is matched to the output impedance of the amplifier.
- Use appropriate output capacitors if driving capacitive loads to prevent instability.
Biasing and Offset:
- The input bias current is very low (0.5nA), but use high-value resistors with care to avoid significant voltage drops.
- The input offset voltage is typically 0.5mV. Use trimming techniques if higher precision is required.
Thermal Management:
- Ensure adequate heat dissipation, especially when operating at higher supply voltages or high output currents.
- Mount the device on a heatsink or a PCB with good thermal conductivity if necessary.
Slew Rate and Bandwidth:
- The slew rate of 10V/μs ensures fast response to large signal changes.
- The small-signal bandwidth of 10MHz is suitable for a wide range of applications, including audio and RF.
Operating Temperature:
- The device can operate over a wide temperature range (-40°C to 125°C). Ensure the ambient temperature does not exceed these limits to maintain reliable operation.
Storage and Handling:
- Store the device in a dry environment to prevent moisture damage.
- Handle with care to avoid static discharge, which can damage sensitive components.
By following these guidelines, you can ensure optimal performance and reliability of the LME49860 operational amplifier in your application.
(For reference only)Inquiry - LME49860
