Share:
Specifications
SKU: 1906614
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Type | Device Type | Photocoupler | - |
| VCEO | Collector-Emitter Voltage (Open Circuit) | 70 | V |
| VIORM | Input Loop Rated Voltage | 250 | Vrms |
| IC | Collector Current | 50 | mA |
| VF | Forward Voltage | 1.2 | V |
| IF | Forward Current | 20 | mA |
| CTR | Current Transfer Ratio | 50% to 300% | - |
| Isolation Voltage | Between Input and Output | 5000 | Vrms |
| Operating Temperature | Ambient | -40 to +110 | °C |
| Storage Temperature | -40 to +125 | °C | |
| Lead Soldering Temperature | 260 | °C (10s) |
Instructions for Use:
-
Handling:
- Handle the GBJ2510 with care to avoid mechanical damage.
- Use appropriate ESD protection to prevent damage from static electricity.
-
Mounting:
- Ensure proper alignment of the leads during soldering.
- Do not apply excessive heat or force during soldering.
- Allow the device to cool naturally after soldering.
-
Electrical Connections:
- Connect the input side (LED) to the control circuit.
- Connect the output side (phototransistor) to the load circuit.
- Ensure that the maximum ratings for VCEO, IC, and VF are not exceeded.
-
Operating Conditions:
- Operate the device within the specified temperature range to ensure reliable performance.
- Monitor the current transfer ratio (CTR) to ensure efficient operation.
-
Storage:
- Store the device in a dry, cool place to prevent moisture damage.
- Avoid exposure to extreme temperatures or humidity.
-
Testing:
- Use a multimeter to test the continuity and voltage levels across the device.
- Ensure that the isolation voltage is maintained between the input and output sides.
-
Troubleshooting:
- If the device fails to operate, check for proper connections and power supply.
- Verify that the input current is sufficient to activate the phototransistor.
- Replace the device if it shows signs of physical damage or failure.
Inquiry - GBJ2510
