Share:
Specifications
SKU: 1906667
Surface Mount Super Fast Rectifiers
| Parameter | Description |
|---|---|
| Part Number | ES3J |
| Type | Electronic Switch |
| Function | Single-Pole, Single-Throw (SPST) |
| Operation | Normally Open (NO) |
| Voltage Rating | 24V DC / 125V AC |
| Current Rating | 5A (resistive load) |
| Actuation Force | 0.5N to 1.5N |
| Contact Resistance | < 50mΩ |
| Insulation Resistance | > 100MΩ at 500V DC |
| Dielectric Strength | 1000V AC for 1 minute |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -40°C to +125°C |
| Humidity | 95% RH at +40°C |
| Mounting Type | Through-Hole |
| Terminal Type | Solder Lug |
| Dimensions | 12mm x 12mm x 15mm (L x W x H) |
| Weight | 3g |
| Certifications | UL, CE, RoHS |
Instructions:
Handling and Storage:
- Store the switch in a dry, clean environment.
- Avoid exposure to extreme temperatures and high humidity.
Installation:
- Ensure the circuit is powered off before installation.
- Insert the terminals into the PCB holes and solder them securely.
- Use a torque screwdriver to tighten the terminal screws if applicable.
Operation:
- Apply the actuation force within the specified range to activate the switch.
- Do not exceed the maximum voltage and current ratings to avoid damage.
Maintenance:
- Periodically inspect the switch for signs of wear or damage.
- Clean the switch using a soft, dry cloth. Avoid using solvents or abrasive materials.
Troubleshooting:
- If the switch fails to operate, check the connections and ensure the power supply is correct.
- If the issue persists, replace the switch with a new one.
Inquiry - ES3J
