Instructions for Use:

1. Power Supply:

   • Connect the supply voltage between +12V and +15V to the Vcc pin.
   • Ensure the ground connection is secure to the GND pin.

2. Input and Output Connections:

   • Connect the RF input signal to the IN pin.
   • Connect the load or next stage to the OUT pin.
   • Use 50 Ohm impedance matching for optimal performance.

3. Heat Dissipation:

   • Ensure adequate heat dissipation by mounting the amplifier on a heatsink or a PCB with sufficient copper area.

4. Handling:

   • Handle the device with care to avoid damage from static electricity.
   • Use appropriate ESD protection measures during handling and installation.

5. Testing:

   • Before connecting to the main circuit, test the amplifier using a signal generator and spectrum analyzer to verify gain and noise figure.
   • Ensure all connections are correct and secure before applying power.

6. Storage:

   • Store the device in a dry, cool place within the specified storage temperature range to prevent damage.

7. Troubleshooting:

   • If the amplifier does not function as expected, check the power supply, input/output connections, and ensure the device is not overheating.
   • Refer to the datasheet for more detailed troubleshooting steps and specifications.