Instructions for Use:

1. Handling:

   • Handle the component with care to avoid mechanical damage.
   • Avoid exposure to excessive moisture or contaminants.

2. Mounting:

   • Ensure the PCB is clean and free from contaminants before mounting.
   • Use a soldering iron with a temperature setting not exceeding 260°C.
   • Apply solder to both ends of the resistor simultaneously to ensure proper adhesion.

3. Soldering:

   • Do not exceed the maximum soldering temperature of 260°C.
   • The soldering time should not exceed 10 seconds per joint.
   • Allow the component to cool naturally after soldering.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from static and environmental factors.

5. Testing:

   • Use a multimeter to verify the resistance value after installation.
   • Ensure the resistance is within the specified tolerance range (±5%).

6. Operating Conditions:

   • Operate the device within the specified temperature range (-55°C to +125°C).
   • Ensure the operating voltage does not exceed the maximum working voltage of 50V.
   • Maintain relative humidity between 0% and 95%.

7. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle or dispose of the component responsibly.