Share:
Specifications
SKU: 2210285
| Parameter | Description | Value |
|---|---|---|
| Device Type | Single-Channel, Low-Side Switch | - |
| Package | SOT-23-3L | - |
| Input Voltage (VIN) | Operating Input Voltage Range | 1.8V to 5.5V |
| Output Current (IOUT) | Continuous Output Current | 200mA |
| On-State Resistance (RDS(on)) | Maximum On-State Resistance at VIN = 5V, IOUT = 200mA | 0.2Ω |
| Operating Temperature (TOP) | Operating Junction Temperature Range | -40°C to 125°C |
| Storage Temperature (TSTG) | Storage Temperature Range | -65°C to 150°C |
| Input Threshold Voltage (VIH) | High-Level Input Voltage | ≥1.4V |
| Input Threshold Voltage (VIL) | Low-Level Input Voltage | ≤0.8V |
| Power Dissipation (PD) | Maximum Power Dissipation at TA = 25°C | 340mW |
| ESD Protection | Human Body Model (HBM) | 2kV |
| Leakage Current (ILEAK) | Maximum Leakage Current at VIN = 5.5V, TA = 25°C | 1μA |
Instructions for Use:
Circuit Connection:
- Connect the input pin (IN) to the control signal.
- Connect the output pin (OUT) to the load.
- Connect the ground pin (GND) to the common ground.
Power Supply:
- Ensure the input voltage (VIN) is within the specified range of 1.8V to 5.5V.
- Do not exceed the maximum continuous output current of 200mA.
Thermal Management:
- The device can operate up to a junction temperature of 125°C. Ensure adequate heat dissipation if operating near this limit.
- For applications requiring higher power dissipation, consider using a heatsink or improving PCB thermal design.
Input Signal:
- The device will turn on when the input voltage is above 1.4V and turn off when it is below 0.8V.
- Avoid input voltages between 0.8V and 1.4V to prevent undefined behavior.
ESD Precautions:
- Handle the device with care to avoid damage from electrostatic discharge.
- Use appropriate ESD protection measures during handling and assembly.
Storage:
- Store the device in a dry environment within the temperature range of -65°C to 150°C.
Testing:
- Before final assembly, test the device under typical operating conditions to ensure proper functionality.
- Verify the leakage current and on-state resistance to confirm the device meets specifications.
Inquiry - TH72012.2
