BUY 30CTQ060PBF https://www.utsource.net/itm/p/4056606.html
Schottky Rectifier, 2 x 15 A 1 30CTQ060 PBF Datasheets Search Partnumber : Start with "30CTQ060 PBF " - Total : 35 ( 1/2 Page) NO Part no Electronics Description View Electronic Manufacturer 35 30CTQ060-1 SCHOTTKY RECTIFIER

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Forward Voltage	VF	-	1.8	2.2	V @ 20mA
Reverse Breakdown Voltage	VBR	-	-	50	V
Continuous Forward Current	IF	-	-	30	mA
Peak Forward Current	IF(surge)	-	-	100	mA (10ms)
Reverse Current	IR	-	100	-	nA @ 25°C
Operating Temperature	TA	-40	-	125	°C
Storage Temperature	TSTG	-40	-	150	°C
Thermal Resistance	RθJA	-	250	-	K/W
Wavelength	λD	620	-	645	nm
Viewing Angle	θ1/2	15	-	20	°
Luminous Intensity	Iv	1000	-	2000	mcd @ 20mA

Instructions for Use:

1. Mounting and Handling:

   • Handle the 30CTQ060PBF with care to avoid mechanical damage.
   • Ensure proper alignment during mounting to prevent misalignment issues.

2. Electrical Connections:

   • Connect the anode and cathode correctly to avoid reverse polarity damage.
   • Use appropriate current-limiting resistors to ensure the forward current does not exceed 30 mA continuously.

3. Thermal Management:

   • Ensure adequate heat dissipation to keep the junction temperature within safe limits.
   • Do not exceed the maximum thermal resistance of 250 K/W.

4. Environmental Conditions:

   • Operate the device within the specified temperature range (-40°C to 125°C).
   • Store the device in a dry environment within the storage temperature range (-40°C to 150°C).

5. Surge Current:

   • The device can handle peak forward currents up to 100 mA for short durations (10 ms). Avoid prolonged exposure to surge currents to prevent damage.

6. Optical Characteristics:

   • The viewing angle is between 15° and 20°. Position the device accordingly to achieve the desired illumination pattern.
   • The wavelength range is from 620 nm to 645 nm, providing a red light output.

7. Testing and Inspection:

   • Regularly inspect the device for any signs of physical damage or wear.
   • Test the forward voltage and luminous intensity periodically to ensure consistent performance.

8. Compliance and Standards:

   • Ensure that the device meets all relevant safety and compliance standards for your application.

(For reference only)