BUY 39150 https://www.utsource.net/itm/p/4060958.html
Plastek Stackable Nesting Totes List of Unclassifed Manufac... 39100 Plastek Storage Containers 39100 Plastek Storage Containers Molex Electronics Ltd. 39100-0802 8.00mm (.315) Pitch 10.00mm (.394) Pitch 12.00mm (.472) Pitch 15.00mm (.591) Pitch Eurostyle? Two-Screw Terminal Strip 39100-0803 8.00mm (.315) Pitch 10.00mm (.394) Pitch 12.00mm (.472) Pitch 15.00mm (.591) Pitch Eurostyle? Two-Screw Terminal Strip

Parameter	Description
Part Number	39150
Type	Electronic Component
Category	[Specify Category, e.g., Resistor, Capacitor, IC, etc.]
Manufacturer	[Specify Manufacturer]
Package/Case	[Specify Package Type, e.g., TO-220, SMD, DIP, etc.]
Operating Voltage	[Specify Operating Voltage Range, e.g., 5V, 12V, 3.3V to 5V, etc.]
Operating Current	[Specify Operating Current Range, e.g., 10mA, 1A, etc.]
Power Rating	[Specify Power Rating, e.g., 1W, 5W, etc.]
Temperature Range	[Specify Temperature Range, e.g., -40°C to 85°C, etc.]
Tolerance	[Specify Tolerance, e.g., ±1%, ±5%, etc.]
Frequency Range	[Specify Frequency Range, if applicable, e.g., 100kHz to 1MHz, etc.]
Capacitance	[Specify Capacitance, if applicable, e.g., 100nF, 1μF, etc.]
Resistance	[Specify Resistance, if applicable, e.g., 1kΩ, 10kΩ, etc.]
Inductance	[Specify Inductance, if applicable, e.g., 10μH, 1mH, etc.]
Mounting Type	[Specify Mounting Type, e.g., Through-Hole, Surface Mount, etc.]
Polarity	[Specify Polarity, if applicable, e.g., Polarized, Non-Polarized, etc.]
RoHS Compliant	[Yes/No]
Lead-Free	[Yes/No]
Datasheet	[Link to Datasheet or "N/A" if not available]

Instructions for Use:

1. Installation:

   • Ensure the component is installed according to the specified mounting type.
   • For through-hole components, ensure leads are properly soldered and trimmed.
   • For surface mount components, use appropriate solder paste and reflow techniques.

2. Operating Conditions:

   • Operate the component within the specified voltage, current, and temperature ranges to avoid damage.
   • Check the tolerance and frequency range (if applicable) to ensure compatibility with your application.

3. Handling:

   • Handle the component with care to avoid physical damage.
   • Use anti-static precautions to prevent electrostatic discharge (ESD) damage.

4. Testing:

   • Test the component using the specified parameters to ensure it meets the required performance criteria.
   • Refer to the datasheet for detailed testing procedures and recommended test circuits.

5. Storage:

   • Store the component in a dry, cool place to prevent degradation.
   • Keep components in their original packaging until ready for use.

6. Disposal:

   • Dispose of the component in accordance with local environmental regulations.
   • Recycle where possible.

If you have any specific requirements or need further details, please provide additional information.

(For reference only)